Root Blackview A80 Pro With Magisk And Flash TWRP Custom Recovery

15 Likes Comment

The official TWRP custom recovery is available for downloading and ready to install on Blackview A80 Pro. Now you can root Blackview A80 Pro and install TWRP custom recovery on your device. The Blackview launched its mid-range device in November 2019 which is Blackview A80 Pro. The smartphone comes with better hardware, amazing design, and the latest Android OS. The Blackview A80 Pro comes with 6.49-inches IPS LCD HD+ display with a resolution of 720×1560 pixels. The device is powered by MediaTek Helio P25 SoC processor along with 4GB of RAM and 64GB of internal storage.

The Blackview A80 Pro is packed with quad cameras in the rear which is 13MP+2MP+0.3MP+0.3MP with the IMX258 + GC032A sensor and 8MP camera in front side for a selfie. The smartphone is running out of the box with Android 9.0 Pie. If you are the users of this great phone and not satisfied with your Android OS. If you wish to customize your device or change the Android OS, then the only way to root and install TWRP custom recovery on your device. Here in this article, we come with a simple and easy step by step guide on how to root Blackview A80 Pro and install TWRP custom recovery.

There are many advantages of rooting the phone and installing TWRP custom recovery. After rooting your phone you will be able to flash Xposed Modules, different custom ROMs, creating the Nandroid backups & restores, factory reset, install third-party apps and much more. Basically rooting is the process through that you can break all the restrictions and limitation from your device. Keep in mind before rooting and flashing the TWRP custom recovery, first you will need to unlock the bootloader of your device.

The process to root Blackview A80 Pro and installing the TWRP custom recovery may void your phone’s warranty and also wipe clean all your phone data. So take the proper backup of all your phone important data before proceeding. If you wish to download and install the TWRP custom recovery and root Blackview A80 Pro, then go ahead and follow the given instructions.

root Blackview A80 Pro
root Blackview A80 Pro

Note:

This guide containing the root package and instructions can be used only with the Blackview A80 Pro. Check the model number of your phone if it is Blackview A80 Pro, then go ahead, otherwise not. Do not use these instructions for any other device or incorrect variant.

Warning:

AndroidBlog.gs will not responsible for any damage that occurred to your Blackview A80 Pro during or after the rooting process. Proceed at your risk.

Pre-Requirements:

  • It is highly recommended to make a proper backup of your contacts, messages, photos, videos, and other valuable data on your phone.
  • The battery level of your phone should be at least up to 70% to avoid unexpected shutdowns while rooting.
  • Enable USB Debugging on your phone by navigating to Settings > Developer Options.
  • Download and install the VCOM USB Drivers Blackview A80 Pro on your PC.
Required Files:

Steps to Flash TWRP Custom Recovery On Blackview A80 Pro:

Follow the given step-by-step guide on how to install TWRP recovery on Blackview A80 Pro.

1: – First, download Android SDK from the Android Developers website. Set up ADB and Fastboot on Windows.

2: – Also, setup with downloading platform-tools and USB drivers package in SDK.

3: – Power OFF your A80 Pro and connect it to the PC using its USB data cable.

4: – Download TWRP (twrp-3.2.1-cancro.img) and place it in the same directory where you have extracted Fastboot/ADB package files on your PC.

5: – Go to Fastboot/Bootloader Mode on A80 Pro by pressing and holding Volume Up + Volume Down + Power buttons at the same for a while. Your A80 Pro phone is now in Bootloader Mode.

6: – Open the Fastboot directory on Windows and run Command Prompt within the folder.

7: – Type in the following command and hit Enter.

fastboot flash recovery twrp-3.2.1-0-cancro.img

8: – Once the flashing process completes, select Recovery from the Fastboot menu and enter into Recovery Mode.

Done! You have Install TWRP Recovery on Blackview A80 Pro.

Steps to Root Blackview A80 Pro With Magisk:

Root Blackview A80 Pro With SuperSU

Root Blackview A80 Pro With Magisk

Done! You have successfully installed TWRP recovery and root Blackview A80 Pro, and you can now reboot your phone into recovery mode.

You might like

About the Author: Bhatti Junaid

He continuously writes tech articles and development code. Also, appreciates excellent food, exceptional coffee and great company. He has written 266 guides and other posts.

Leave a Reply

Your email address will not be published. Required fields are marked *