Install XXS1CPC8 Android 6.0.1 Marshmallow Official Firmware on Galaxy S5 G900F

The latest Android 6.0.1 Marshmallow Official Firmware rolled out by Samsung for the Galaxy S5 G900F. The build number of this official firmware is XXS1CPC8 which is now available for the International variants of Galaxy S5 G900F. XXS1CPC8 Android 6.0.1 Marshmallow brings various significant changes like better Settings menu, new icons and many Samsung’s apps have been enhanced and optimised. Also, you’ll find better battery performance and life (thanks to new source code from Google). So if you’d like to flash this latest XXS1CPC8 Android 6.0.1 Marshmallow firmware on your Galaxy S5 G900F, then navigate to OTA (Over-the-air) update system / Samsung KIES. But if can’t install the update through OTA for some reason then don’t worry, you can still follow our given guide to install the Marshmallow update manually. Keep in mind that G900FXXS1CPC8 is an entirely unbranded firmware. Thus you should not get any pre-installed apps or extra language packs with this.

In this guide, we’ll use ODIN flashing tool to update Galaxy S5 LTE G900F to XXS1CPC8 Android 6.0.1 Marshmallow. So go ahead and follow the given step-by-step guide carefully. Don’t forget to take proper backup of all your important data before proceeding to the installation guide.

Note:

This guide containing the XXS1CPC8 Android 6.0.1 Marshmallow firmware and instructions can be used only with the Galaxy S5 LTE G900F. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device before proceeding to the installation guide.

Warning:

AndroidBlog.GS will not be held liable for any damage occurred to your Samsung Galaxy S5 LTE G900F during or after the installation of XXS1CPC8 Android 6.0.1 Marshmallow. Proceed at your risk.

Before Getting Started:

  • Make a proper backup of all the existing data and settings of your Galaxy S5 LTE G900F, in case anything goes wrong then you’ll be able to restore your data back.
  • Verify that you’ve correctly installed the Galaxy S5 USB Drivers on the PC.
  • Enable USB Debugging Mode on your S5 by navigating to Settings > Developer Options > check the USB Debugging option.
  • If you have a custom ROM installed on the phone, then after the installation of the stock update it will be lost.
  • The custom recovery will be replaced by the stock version.
  • If the Galaxy S5 is rooted then after installing the official firmware, it will no longer belong to a rooted version.
  • Check the battery level of your S5; it should be charged at least about 80% before proceeding to the installation guide.

Required Files:

XXS1CPC8 Android 6.0.1 Firmware Details:

Model SM-G900F
Model name GALAXY S5
Country Sri Lanka
Version Android 6.0.1
Changelist 61302269
Build Date Thu, 10 Mar 2016 09:16:06 +0000
Product code SLK
PDA G900FXXS1CPC8
CSC G900FSLK1CPB2

Steps To Flash XXS1CPC8 Android 6.0.1 on Galaxy S5 LTE G900F:

Step No 1:– First, download Android 6.0.1 G900FXXS1CPC8 and Odin v3.09 for Galaxy S5 on the desktop of your PC and extract the .zip files.

 Odin3 v3.09

Step No 2:– Turn OFF your Galaxy S5 in order to boot into Download Mode.

Step No 3:– Turn the device ON by pressing and holding the Volume Down + Home keys at the same time and then press the Power button till the construction Android robot and a triangle appear. Now press Power button once again to confirm to enter into Download Mode.

Step No 4:– Launch Odin tool on your PC as an Administrator and plug your phone to your PC while your phone is in the Download Mode.

Step No 5:– One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.

Step No 6:– Select the firmware files that you want to flash on your Galaxy S5. (Already extracted in Step No 1)

Click on ‘AP’ and select file with ‘AP’ in its name.

Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.

Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.

Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

Step No 7:– In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked but the Re-Partition option should be unchecked.

Step No 8:– Click on the Start button in Odin to initiate the installation process. It will take a few minutes to complete.

Step No 9:– Once the installation process is successfully finished, the Galaxy S5 will restart. Unplug the phone after you see the home screen.

Done! You have successfully updated Samsung Galaxy S5 to Android 6.0.1 build XXS1CPC8 firmware update.

Let us know in the comments area below if you have any question or trouble while following the above guide.

One Response

  1. Husnain Waleed October 10, 2016

Leave a Reply