Covering The Latest Android Firmwares, Updates, News, Apps, Custom ROMs, Tips and How To Guides

Install Android 5.0.2 G360FXXU1BOD9 OTA on Galaxy Core Prime SM-G360F

Install Android 5.0.2 G360FXXU1BOD9 OTA on Galaxy Core Prime SM-G360F
Rate this post

The latest and greatest version of Android 5.0.2 Lollipop can be installed on Galaxy Core Prime (SM-G360F), which is among the few lucky budget smartphones which can now taste the sweetness of Lollipop. The build number of this Android 5.0.2 based OTA update is G360FXXU1BOD9 which is now available for the users in Poland.

Many users have tested this new Lollipop firmware and they found its performance faster, enhanced battery life and user-friendly interface. If you are interested then go ahead and download the firmware using Samsung KIES manually. As the roll-out has commenced in Poland and it may take some time before it is made available all over the world soon. But if you can’t wait for the update to be available on your device then follow the given step by step detailed guide to get Android 5.0.2 carries build number G360FXXU1BOD9 on your Galaxy Core Prime.

Install Android 5.0.2 Lollipop build G360FXXU1BOD9 on Galaxy Core Prime

Note:

This guide containing the Android 5.0.2 build G360FXXU1BOD9 OTA file and instructions are working with only Galaxy Core Prime SM-G360F. Do  not try to install this firmware on any other device or incorrect variant. Check the model number of your device first.

Warning:

AndroidBlog.GS will not be held responsible for any kind of damage occurred to your Galaxy Core Prime during or after the installation process of Android 5.0.2 build G360FXXU1BOD9. Proceed at your own risk.

Before Getting Started:

  • Make a proper backup of all the existing data and settings via custom recovery like TWRP or CWM.
  • Verify that you’ve properly installed the Galaxy Core Prime USB Drivers on the PC.
  • Enable USB Debugging Mode on your Galaxy Core Prime by navigating to Settings > Developer Options > check the USB Debugging option.
  • Your Galaxy Core Prime SM-G360F should factory unlocked.
  • You should have an unlocked SM-G360F to install the official build G360FXXU1BOD9.
  • If you have a custom ROM installed on the phone, then after the installation of the stock update it will be lost.
  • The custom recovery will be replaced by the stock version.
  • If the Galaxy Core Prime is rooted then after installing the official firmware, it will no longer belong to a rooted version.
  • Check the battery level of your Core Prime, it should be charged at least about 80% before proceeding to the installation guide.

Required Files:

Android 5.0.2 G360FXXU1BOD9 Lollipop Firmware Details:

Model SM-G360F
Model name Galaxy Core Prime
Country Poland
Version Android 5.0.2
Changelist 529393
Build date Tue, 28 Apr 2015 00:43:41 +0000
Product code XEO
PDA G360FXXU1BOD9
CSC G360FOXA1BOD9

Steps to Install Android 5.0.2 Lollipop Stock Build G360FXXU1BOD9 on Galaxy Core Prime:

Follow the given steps to update Galaxy Core Prime SM-G360F to Android 5.0.1 Lollipop G360FXXU1BOD9 firmware:

Step No 1:- First, download the Android 5.0.2 Lollipop G360FXXU1BOD9 firmware (XEO-G360FXXU1BOD9-20150511163251.zip) file for your Galaxy Core and Odin3 v3.09 on the desktop of the PC from the above given links.

Step No 2:- Extract both of the zipped files in a folder on your PC.

Step No 3:- Turn OFF the Galaxy Core to boot into Download Mode.

Step No 4:- Turn ON the phone by pressing and holding Home + Power + Volume Down buttons altogether.

Step No 5:- Run Odin3 v3.09 on the PC (as Administrator).

Step No 6:- As the Galaxy Core Prime is currently in Download Mode, connect it with PC and wait for a while till Odin detects it. If the drivers are installed correctly then the ID: COM box will turn light blue in Odin after phone is connected successfully.

Step No 7:- In Odin, click on the AP button and navigate to the firmware file that you’ve already extracted and placed on the desktop of your PC.

Step No 8:- Ensure that you’ve checked Auto Reboot and F.Reset Time options and the Re-Partition option must be unchecked.

Step No 9:- In Odin, click on the Start button to begin the installation process that may take a few minutes to completed.

Step No 10:- Once the flashing process is finished, the Galaxy Core Prime SM-G360F will be automatically rebooted.

Step No 11:- Disconnect the device from the PC after the home screen appears.

Done! You’ve installed the G360FXXU1BOD9 Android 5.0.2 Lollipop stock build on the Galaxy Core Prime successfully.

Let us know in the comments area below if you need any help or having trouble while installing this Android 5.0.2 stock Lollipop firmware on your Galaxy Core Prime.

Android 5.0.2 G360FXXU1BOD9 stock firmware is now installed and you can enjoy the latest Lollipop features on your Galaxy Core Prime.

Source

11 Comments
  1. Gaus says

    Can i install this firmware on my SM-G360H…?

    1. Michael says

      Did you try install this ROM on your SM-G360H?

  2. bankey says

    🙂 tnx a lot.. just flashed.. now first boot after… takes some time.. and i had to understand that the unlockcode was asked in polish. .. 😉

    I’ll see how and where to change it later on..

    tnx a lot anyway

    1. Harindu Jayadewa says

      What is your device? g360h or g360f

  3. pratik says

    download link in not wirking….unable to download

    1. Harindu Jayadewa says

      You can download it from sam mobile .following link .First you have to create an account and search for firmware.then you can download you wish

  4. Harindu Jayadewa says

    This G360FXXU1BOD9 rom couldn’t flash with odin on my galaxy core prime g360h.it shows Nand Write and stuck.please help

    1. Rayhan Akram says

      It only works with the G360F, not the G360H.

  5. panchal pratik says

    Odin stuck at..nand write start and..then…it shows…fail…help plzzz….

  6. Bwskey says

    Can it work on dual core g360h

  7. Abner says

    It Works?

Leave A Reply

Your email address will not be published.