How To Install Android 5.0.1 Lollipop Build LRX22C Factory Images on Nexus 4 and Nexus 6

The Android 5.0.1 factory images for the updated OS are now available, for the Nexus 6 and Nexus 4 devices as build LRX22C. Google released the updated images last week for the Nexus 9, Nexus 7 and Nexus 10. So users having Nexus 6 and Nexus 4 devices can now receive this Lollipop update via OTA update and through Google’s factory images as well. But if you are facing problem while updating your devices via OTA then you can also download and install the factory images on Nexus 4 and Nexus 6 manually before installing a custom ROMs or rooting.

Here we’ve given a step by step guide on how to update Nexus 4 / Nexus 6 to Android 5.0.1 Lollipop build LRX22C via factory images. Check out these instructions and direct download links.

Install Android 5.0.1 Lollipop Factory Images on Nexus 6&4

Note: The Android 5.0.1 factory images are only applicable for Nexus 6 and Nexus 4 devices. Double check the model number of your Nexus device before flashing factory images.

Warning:

Installing a wrong image on any other device might brick your device. AndroidBlog.GS will not be held responsible for any damage occurred to your Nexus device. Proceed at your risk.

Before Getting Started:

  • Don’t forget to take backup of all important data such as SMS, MMS, Settings, Contents, Call Logs and Contacts, etc.
  • Unlock the bootloader of your Nexus device, because if it is not unlocked then installing Android 5.0.1 LRX22C factory image will wipe out all the data. Check out this guide on to Unlock Bootloader on Nexus 6
  • Your Nexus device should have about 70 to 80% battery charge before proceeding with the flashing process.

Download Required Files (Android 5.0.1 Factory Images)

Download Android 5.0.1 Lollipop Factory Image For Nexus 4

Download Android 5.0.1 Lollipop Factory Image For Nexus 6

Install Android 5.0.1 Lollipop Build LRX22C

Steps to Install Android 5.0.1 Factory Images on Nexus 4 and Nexus 6:

Step No 1: – After download, the above factory image file on your PC, connect the Nexus 4/6 to your PC its USB data cable.

Step No 2: – Install and configure the Fastboot on your PC. Check this guide

Step No 3: – Now boot your Nexus device into Fastboot/Bootloader mode: Turn Off your device and then press and hold Volume Up + Power buttons at the same time. Now release the buttons once the fast boot menu and Start icon appear on the screen of the Nexus 4 or Nexus 6.

Step No 4: – Now unzip the image file that you’ve already downloaded from the above link to a folder on the desktop of your PC.

Step No 5: fast boot- Next, transfer the extracted files fast boot directory.

Step No 6: – Open the Fastboot directory and choose the right factory image file from there and execute the commands, depending on the installed operating system on your PC.

For Windows: Run the file:

flash-all.bat

For Mac: Run the file using Terminal:

flash-all.sh

For Linux: Run the file:

flash-all.sh

Step No 7: – This process will take some time to be completed successfully, so set back.

Step No 8: – The Nexus device will be rebooted once the installation is finished successfully. It might take about 4-5 minutes to boot your Nexus device for the first time.

Great! You have successfully updated the Nexus 4 or Nexus 6 to Android 5.0.1 Lollipop build LRX22C via factory image.

Source: Android Central

You May Also Like

About the Author: Aamir Jamal

An Android Geek and audiophile who love to read and write reviews/tutorials about gadgets and new tech stuff. He has written 1045 guides and other posts.

Leave a Reply

Your email address will not be published. Required fields are marked *