This article article will guide you on how to flash files on Realme C11 RMX2185 along with their firmware installation guide. If you do not know how to flash files on Realme C11, then you are at the right spot. In order to install a firmware file on Realme C11, you are required to install a flash tool called the SP Flash Tool. This tool proves very handy to flash Stock ROM files on your device. We have included a step by step guide for you so you can easily flash files on Realme C11.
Android users often find themselves with problems that they do not know how to fix. Be it a hard brick issue or fixing Bluetooth or Wi Fi issues. Users also face difficulty while unrooting their device or wanting to downgrade or fix the lag or freezing display. Whatever the problem is, an effective solution is to install Stock ROM back on your Realme C11. Flashing Stock ROM will just be like doing a factory reset on your Realme C11 that already runs on Stock firmware.
Realme C11 Specifications
The Realme C11 features a splash resistant design along with a square shaped camera module on the rear which sports two cameras along with the LED flash light. The textured back panel helps providing a better grip for the user and to prevent fingerprints. A large Realme logo is placed within a vertical strip at the back that runs from the square camera module to the bottom of the phone.
A water drop camera notch is featured on the front which contains the camera for selfies. On the bottom, there is a micro USB port. Talking about the features, the Realme presents a 6.5-inch HD+ display with a rather large bottom chin. As the official Realme website has not mentioned any Gorilla glass protection, we believe that the phone does not has one. The device is also equipped with MediaTek Helio G35 SoC which has high performance cores featuring at 2.3GHz.
Talking about cameras, the Realme C11 features two cameras at the back, with the primary camera being 13 Megapixel with an f/2.2 aperture and a secondary depth sensor. Features of the rear camera include AI Beauty, Filter Mode, HDR, bird’s eye view, Portrait Mode, Time lapse, Slo-mo, Super NightScape, Expert Mode, etc. The camera can also increase to 1080p videos at 30 fps. The camera on the front is a 5 Megapixel shooter with an f/2.4 aperture lens and a 1.12-micron pixel size. similar to the rear camera, it can increase to 1080p 30fps videos.
The phone features 2 GB RAM and 32 GB internal storage. The triple card slot means that a microSD card can be equipped without having to remove the second SIM card. It also sports a colossal 5000 mAh battery and with the giant battery, it also has a reverse charging feature to charge the an other device. Unfortunately, the phone does not arrive with a fast charging support.
What is the Use of Firmware Files
Stock ROM or Stock firmware is the original ROM or software developed by an OEM for a specific device. These files help to fix any issues found on your device. If you are facing any problem on your mobile phone and are unable to fix it, your final resort will be to reinstall the stock ROM on your phone. This way, your device will be good as new and all of the problems will be fixed. Users who are always looking to root their phones and trying to install Custom firmware will find this article more helpful.
Advantages of Stock ROM:
Below listed are the reasons why you should use Stock ROM and why you need to flash files on Realme C11:
- If your device is bricked, you can have it unbricked by installing a Stock ROM file
- The IMEI files on your phone can be repaired by using DB files from Stock ROM
- You can flash files on Realme C11 and remove the Stock ROM files to remove malware and adware
- The Bootloop issue on Realme C11 can also be fixed using Stock ROM
- You can use it to fix Unfortunately, the app has stopped error on Realme C11
- Use it to fix Network related issue
- You can also Patch Boot image to Root using Magisk
- It can also be used to unroot Realme C11
- It can also be used to remove FRP lock on your device
- Stock ROM can also restore your Realme C11 to factory slate
- Device Name: Realme C11 RMX2185
- ROM Type: Stock ROM Flash Files
- GApps File: Included
- Tool Supported: SP Flash Tool
- Processor: Mediatek Helio G35
- Android Version: Android 10 with Realme Ui 1.0
Steps to Flash Files on Realme C11
Before going ahead with the tutorial to flash files on Realme C11, you should first take care of a few pre requisites.
- Please keep in mind that this guide will work only with the Realme C11 RMX2185. This steps should not be implemented for any other device.
- You are required to have a Windows Laptop or PC for this guide.
- Your Realme C11 should at least be charged up to 60%.
- It is always recommended to take a backup of your Android Device to keep important files and data safe.
- Read our article: Backup Android device without root
- Read our article: Perform Nandroid backup and restore it to your device
- Download and install the SP Flash Tool on your Windows PC or laptop
- You should have the appropriate Realme drivers installed and configured on your PC.
Download Flash Files:
|Flash File Name: RMX2185_11_A.67|
File Size: 3 GB
Firmware Link: Download
We will not be held responsible for bricking or any hardware or software caused during the implementation of the steps. Problems can be caused due to incorrect implementation of steps so it is advised that you should read and understand the entire method before starting the task. Follow the guide on your own risk.
Instructions to Install Using Recovery
Below mentioned are the steps following which you can flash files using recovery mode:
STEP 1: Download the flash file for your Realme smartphone given above.
STEP 2: Then you need to move the downloaded firmware to the phone storage or to the external storage such as the SD card.
STEP 3: Then power off your phone
STEP 4: Then you need to enter recovery mode. You can do this by pressing and holding the Power button and the Volume down button at the same time
STEP 5: Then choose your choice of language from the options that are provided
STEP 6: Under ColorOS recovery, tap on Install from Storage Device.
STEP 7: Depending on whether kept your Stock firmware file in your phone storage or in your external storage ( Step 2), select the firmware file.
STEP 8: Finally, tap on the firmware file to begin the installation
Method to Install Using SP Flash Tool
Here are the instructions you need to follow in order to install Stock ROM on the Realme C11:
STEP 1: First of all make sure that you have took care of all the pre requisites and have downloaded all the integral files and required tools on your Windows PC or laptop.
STEP 2: Then open the Flash tool exe file in order to open the SP Flash Tool user interface
STEP 3: Once the SP flash tool UI is opened, tap on the Download option
STEP 4: From the download tab, you will have to load up both the download agent and the scatter text file within the scatter loading section.
STEP 5: You will find the scatter text file within the Stock ROM package that you downloaded above
STEP 6: As soon as the file is loaded up, click on the Green Download button
STEP 7: In order to start the process to flash files on Realme C11, power off your device first. Boot your device into fastboot mode by pressing the Power button and the Volume Up key together. Connect your Realme C11 to your computer and keep the volume buttons pressed until the computer recognizes your device.
STEP 8: As soon as your phone is connected, your mobile phone will automatically start to install the firmware.
STEP 9: Then wait for a few minutes until the installation process is finished.
STEP 10: As soon as the flashing process is completed, you will see a green tick sign which means that your installation has been successfully completed.
STEP 11: That is it! Now you just need to reboot your phone
We hope that you found this guide helpful. If you have any questions, let us know in the comment section below.