LineageOS is one of the best and popular custom firmware providers in the Android market. Recently, the LineageOS team added some Xiaomi devices and shared the latest LineageOS 17.1 for Xiaomi device custom firmware. The latest custom ROM is based on Android 10 OS for Mi 5, Mi 5s Plus, Mi Note 2, and Mi MIX variants. The LineageOS has already built and shared the custom firmware based on Android 10 for Xioami’s latest devices. Now the company extends the limits and added four Xiaomi devices.
So if you are the owner of one of these smartphones and wish to upgrade your device to the Android 10 OS, then now the wait is over. You can now download and install the LineageOS 17.1 for Xiaomi devices, custom ROMs based on Android 10. Given below we share the list of the direct links of the latest LineageOS 17.1 custom firmware. Through that link, you can download and flash the LineageOS 17 for the Xiaomi device. The latest custom ROM is a stable build and you can run it on your device without any kind of risk.
The LineageOS 17.1 ROM brings lots of new features such as system-wide dark mode, revamped iconography, improved one-handed usability, Quick Settings Area, Notification Dots, and much more. Also, the custom firmware comes with some aftermarket features and customizations which are not possible in the official stock ROM. In order to install the LineageOS 17.1 for Xiaomi device, your device should have an unlocked bootloader and have the latest TWRP custom recovery on your device.
After flashing this latest custom firmware, you can get the experience and enjoy all the features of Android 10 OS. If you are a fan of custom ROMs, then we strongly recommend that LineageOS custom ROM is the best. If you are interested in downloading and installing the LineageOS 17.1 for Xiaomi device, then go ahead and follow the given instructions.
The LineageOS 17.1 Android 10 custom ROM and the instructions given in this guide are working only for the Xiaomi devices. Check the model number of your Xiaomi devices from Settings > About Phone.
- Create a proper backup of all your existing data and settings on the phone before proceeding to the installation guide using a recommended custom recovery.
- Enable USB Debugging Mode on the Xiaomi devices by navigating to Settings > Developer Options.
- Verify that you’ve correctly installed the Xiaomi devices USB Drivers on the PC.
- The Xiaomi devices should be rooted in the latest version of a custom recovery like CWM or TWRP installed.
- The bootloader of your Xiaomi devices must be unlocked.
- Make sure that the battery level of the Xiaomi devices is at least above 80% before going ahead.
|Device and XDA Forum Link||Device codename and Wiki Link||Maintainer|
|Xiaomi Mi 5||gemini||bgcngm, defer, h2o64|
|Xiaomi Mi 5s Plus||natrium||LuK1337|
|Xiaomi Mi Note 2||scorpio||joe2k01|
|Xiaomi Mi MIX||lithium||balika011, blunden|
Steps to Flash LineageOS 17.1 For Xiaomi Devices Android 10 ROM:
Step No 1: – First, download LineageOS 17.1 Android 10 custom ROM for Xiaomi devices on the desktop of the PC.
Step No 2: – Plug your device into the PC using its USB data cable and mount its USB memory storage.
Step No 3: – Transfer LineageOS 17.1 Android 10 ROM .zip file which you’ve already downloaded from the above links to the root folder of your SD card on the phone.
Step No 4: – Unplug the Xiaomi devices from the PC and power it OFF to boot into Recovery Mode.
Step No 5: – Power ON the device while pressing and holding Volume Up + Home + Power buttons at the same time to enter into Recovery Mode.
Step No 6: – While your device is now in CWM Recovery, perform wipe data/factory reset, wipe cache partition and wipe Dalvik cache also by navigating to Advanced > Wipe Dalvik Cache.
Note: – wipe Dalvik cache will help you to prevent boot loops and other errors while ROM installation.
Step No 7: – Go back to the main Recovery Menu and choose to install zip from SD card → choose zip from sd card.
Step No 8: – Navigate to the LineageOS 17.1 Android 10 custom ROM .zip file which you’ve already transferred to the SD card of your device previously. Select the ROM .zip file using the Power button and confirm the installation to begin.
Step No 9:- Navigate to +++++Go Back+++++ once the installation is completed. From Recovery Menu, reboot your device by selecting reboot system now.
Your Xiaomi devices will be rebooted and may take about 4 to 5 minutes to boot for the first time after installation.
Done! You’ve successfully installed the LineageOS 17.1 for Xiaomi Android 10 custom ROM.