Download J600FXXU3BSCA Android Pie Update for Galaxy J6

11 Likes Comment

Here is how to download the J600FXXU3BSCA Android Pie update for Galaxy J6. Samsung has started pushing out the latest Android 9.0 Pie official update for Galaxy S6 via OTA. Now proceed to install the Android Pie update on Galaxy J6.

Samsung is busy in rolling out the latest iteration of Android and now the time to install Android Pie update on Galaxy J6. Samsung Galaxy J6 is one of the first devices in the J series which receives the Android Pie update officially and it has now joined the list Android Pei update. The latest official update is rolling out currently in Italy and soon the update goes live in markets across the world.

Here in this article, we share a simple and easy step by step guide on how to download and install Android Pie update on Galaxy J6. The Galaxy J6 Android Pie update comes with Samsung’s One UI custom skin on top of Android Pie. Also, the update packed with all the key features of Android Pie and user experience. The Android Pie update is rolling out via OTA and comes with build id number is J600FXXU3BSCA.

You can check the update manually by going to device Settings > Software update if you see the new update with build id J600FXXU3BSCA then just download and install it. If you still not receive the official update and you are excited to install Android Pie update on Galaxy J6, can’t wait for more. Then still you can install it by following given below detailed guide using the Odin tool.

The Galaxy J6 Android Pie update brings security patch is April 2019, which fixes most of the bugs and errors. The most recent update comes with lots of new features and customizations. The update is a stable version and smoothly run on your device, after that, your device runs fast and enhanced battery life before that. If you are interested in installing the Android Pie update on Galaxy J6 then go ahead and follow the given steps.

Android Pie update on Galaxy J6

Note:

This guide containing the Official Android Pie firmware and instructions can be used only with the Galaxy J6. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device by navigating to Settings > About Phone.

Warning:

AndroidBlog.gs will not responsible for any damage occurred to your Samsung Galaxy J6 during or after the installation of Android Pie Proceed at your risk.

Pre-Requirements:

  • Make a proper backup of all the existing data and settings of your Galaxy J6, in case anything goes wrong then you’ll be able to restore your data back.
  • Verify that you’ve correctly installed the Galaxy J6 USB Drivers on the PC.
  • Enable USB Debugging Mode on your Galaxy J6 by navigating to Settings > Developer Options > check the USB Debugging option.
  • If you have a custom ROM installed on the phone, then after installing this stock update, it will be lost.
  • The stock version will replace the custom recovery.
  • If the Galaxy J6 will no longer belong to a rooted version, once the stock firmware installed.
  • Check the battery level of your Galaxy J6, and it should be charged at least about 80% before proceeding to the installation guide.

Required Files:

How to Flash Stable Official Android Pie update on Galaxy J6 :

1: – First, download Galaxy J6 Android Pie update Android Pie official update and Odin v3.10.7 for Galaxy J6 on the desktop of your PC.

2: – Now, extract the archived contents to get the tar.md5 update file. Don’t extract the tar.md5 firmware update file.

3: – Turn OFF your Galaxy J6 to boot into Download Mode.

4: – Turn the device ON by pressing and holding the Volume Down + HomePower keys at the same time for a while till the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.

5: – Launch Odin tool on your PC as an Administrator and plug your phone into your PC while your phone is in the Download Mode.

6: – One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.

7: – Select the firmware files tar.md5 that you want to flash on your Galaxy J6. (Already extracted in Step No 1)

Click on ‘AP’ and select file with ‘AP’ in its name.

Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.

Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.

Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

8: – In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked, but the Re-Partition option should be unchecked.

How to Install Odin On Windows 7/8/10

9: – Click on the Start button in Odin to initiate the installation process. It will take a few minutes.

10: – Once the installation process is successfully finished, the Galaxy J6 will restart. Unplug the phone after you see the home screen.

Done! These were the simple steps to download and install J600FXXU3BSCA Android Pie update on Galaxy J6.

Let us know in the comments area below if you have any issues or questions regarding the above guide.

You might like

About the Author: Bhatti Junaid

He continuously writes tech articles and development code. Also, appreciates excellent food, exceptional coffee and great company. He has written 266 guides and other posts.

Leave a Reply

Your email address will not be published. Required fields are marked *