Install Android Pie For Moto Z2 Play Official Firmware

14 Likes Comment

Motorola has finally started rolling out the official update Android Pie for Moto Z2 Play. The Android Pie update is rolling out via OTA and now officially available for Moto Z2 Play. The Moto Z2 Play is a mid-range smartphone that was launched in 2017 with Android Nougat and later upgraded to Android Oreo. Now the time to upgrade your device to the latest Android 9.0 Pie OS and enjoy all the features officially on your own device. The Moto Z2 play might get the update very late because, at this time, Android 10 is officially released for some devices.

The good is news is that, if you are the user of Moto Z2 play and waiting for the Android Pie update, then the wait is over. Now you can download and install the official Android Pie for Moto Z2 Play. Here we come with a simple guide on how to flash the latest Android 9.0 Pie official update on Moto Z2 Play. The Motorola rolling out the new update via OTA in a stage-wise manner, so it takes some time to reach all over the world. First, you can check manually by going to phone Settings’ > ‘System’ > ‘System updates.’

Check for the update, but if you do not find any new update, then you can flash the Android Pie update manually by following the given below guide. Given below, we share the direct link of the official Android Pie update for you. The Android 9.0 Pie update brings tons of new features, customizations, enhanced system stability, and the latest security patch. The new update is a stable build and smoothly run on your device. Now without any delay, download and install the Android Pie for Moto Z2 Play official update.

Android Pie for Moto Z2 Play
Android Pie for Moto Z2 Play

Note:

The Android 9.0 Pie OTA and instructions given in this guide are only working with the Moto Z2 Play. Do not try to install this firmware on any other device or incorrect variant.

Warning:

AndroidBlog.gs will not responsible for any kind of damage or mishap occurred to the Moto Z2 Play during or after the installation of Android 9.0 Pie official OTA build. Proceed at your own risk.

Pre-Requirements:

  • Take a proper backup of all your existing data and settings before proceeding to the ROM installation guide.
  • Download and install the correct USB Drivers for the Moto Z2 Play on the PC.
  • Your device should be unrooted.
  • The Moto Z2 Play must have a stock recovery installed.
  • Make sure that the battery level of your device should be charged at least about 80%.

Required Files:

Steps to Install Android Pie for Moto Z2 Play Official Firmware:

Step No 1: – First, connect your Moto Z2 Play to the computer via its USB data cable.

Step No 2: – Next, transfer the firmware file that you have already downloaded from the above link to the root folder of internal storage on the phone.

Step No 3: – After transferring the Android 9.0 Pie OTA file, disconnect the device from the PC and power it OFF to boot it into Recovery Mode. Power ON the phone while pressing and holding the Volume and Power keys at the same time until you see something on the screen, this is bootloader mode.

Step No 4: – Using the Volume Down button, scroll down to Recovery and choose it using Volume Up and reboot the Moto Z2 Play into recovery mode

Step No 5: – In recovery mode, select install update from sd card.

Step No 6: – Navigate to the location where you have placed the OTA firmware file on the SD Card of your phone. Select it using the Power button and confirm the installation to proceed.

Step No 7: – Go back to the main recovery menu once the installation is completed and select reboot system now.

Done! You’ve successfully installed the Android 9.0 Pie on Moto Z2 Play.

Source: XDA

You might like

About the Author: Bhatti Junaid

He continuously writes tech articles and development code. Also, appreciates excellent food, exceptional coffee and great company. He has written 266 guides and other posts.

Leave a Reply

Your email address will not be published. Required fields are marked *